Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 2
Insert bench foots and make sure the bolt
treads are aligned with the frame tube holes.
Screw in all 3 bolts with washer by hand
then tighten it up with the Allen Wrench.
Adjust joint tubes so the holes will be aligned. Then insert both lockpins and make sure
the lockpins come out from the otherside as shown below. Then flip the bench over and
it will be ready to be used as needed.
STEP 1
Unfold the bench and lay it upside down.
STEP 4
STEP 3
Insert high density foam pads to the bench
cylinder tubes by twisting it clockwise or
counter clockwise. Make sure the foam pad
is all the way in.
Advertisement
Table of Contents
Need help?
Do you have a question about the ADJUSTABLE WEIGHT BENCH and is the answer not in the manual?
Questions and answers