Loading & Unloading Cones - STM ROCKETBOX 2.0 User Manual

L O A D I N G A N D U N L O A D I N G C O N E S
L O A D I N G C O N E S
Always use good quality paper cones and discard
all papers that appear to be defective.
Place the Bottom Tray into the Loading Box.
Carefully drop cones into the Bottom
Tray. Discard any cones that appear
bent, crushed, or otherwise defective.
Add the Top Tray. Lift the trays
together and carefully place into the
RocketBox™.
U N L O A D I N G C O N E S
Once the cycle in the RocketBox™ is complete and the
PSI is at zero, it is safe to unscrew the wingnuts,
remove the washers, and remove the combined trays.
Remove trays and place into Loading Box.
Set the Top Tray aside.
Remove the Bottom Tray from the Loading
Box. Carefully place it onto the Finishing
Base. The Finishing Base pushes the cones
upwards for easier ejection and closing.
1 6