in the main interface is 0-5. If OFF is selected, the adjustable range of the
power gear is 0-6.
6.4.7. Mode setting
Select the MODE, and then press the key
item.
SPEED mode or TORQUE mode can be selected depending on the type of
power sensor. Default SPEED mode.
6.4.8.
Single mileage reset
Select the TRIP, and then press the key
Press the key
clear the single mileage value.
Specification of H102 display
and
at the same time for more than 2 seconds to
to enter the Mode setting
to enter the TRIP page.
15 / 18