Bypass Sensors - 2gig Technologies EDGE Quick Start Manual

Bypass Sensors

When a protected door or window is opened, the Not Ready to Arm message appears and reveals the zone in ORANGE on the Sensors Not Ready list . Before
arming the system, place the system into the Ready to Arm state by (1) walking to the sensor and closing it, or (2) bypassing the sensor(s) .
This screen will be displayed if there are open
and un-bypassed sensors .
1 . Tap BYPASS ALL .
2GIG EDGE Quick Start Guide
2 . Enter the Master code .
12
Number of bypassed
sensors .
3 . The system is now ready to arm . Tap
Arm Stay or Arm Away to arm the
system .
4 . (Optional) Tap the displayed bypass
number to bypass any sensors .