Venta COMFORT PLUS LW15 Instructions For Use Manual page 24

Display
6 AUTO
24 EN
Function
Switch Automatic operation on device on or off by briefly
touching the AUTO button
ON: AUTO in the display flashes continuously and device
automatically regulates the rotational speed depending on
the humidity in the room.
When switching on AUTO, the desired humidity (50 %
i
pre-set) flashes twice and then will show the meas-
ured humidity in the room in the HUMIDITY display 1.
If the pre-set humidity is exceeded by more than 5 %,

the fan will switch off after approx. 60 seconds and
no rotational speed will appear in speed display 2. No air
humidification/air purification will take place.
OFF: AUTO in the display is lit continuously, and the device
runs at the set rotational speed 1 - 3.
Set desired humidity 30 – 70 %:
Hold AUTO-button for 3 seconds. The HUMIDITY 1 display
will flash continuously. Set the desired humidity (in 5 %
increments) using the - or + buttons 3. Hold AUTO-button
for 3 seconds again until the flashing in display HUMIDITY
1 and the humidity measured in the room is shown again.