Appendix 1. Specifications
Scanning
RFID
spec.
Code
scanner
Interface
Bluetooth
Profile(s) supported
Input power
Main power
Internal memory
Operating time (*3)
Environmental
Operating temperature range
conditions
Charging temperature range
Operating humidity range
Storage temperature range
Storage humidity range
Drop resistance (∗6)
Protection rating
Tumble (∗6)
Dimensions (W) × (D) × (H)
Weight
(∗1) Function settings may be subject to restrictions in some countries..
(∗2) To use SQRC outside of Japan, contact your Denso Wave representative.
(∗3) These operating times are reference values measured under room temperature and other conditions set by our company. Actual operating
times depend on working conditions. Conditions set by our company: Power Save Mode 2, RF Tag Continuous Read Mode 1, LOW beeper
level.
(∗4) When the product is used at ambient temperatures of -10°C or below, turn on the product and operate briefly at normal room temperature
before taking the product to the worksite; do not turn off.
Due to battery characteristics, operations may be subject to certain limitations, such as significantly decreased operating time, under low
temperature conditions (0°C or lower). If ambient
Item
RF tag
Frequency
RF Power
Modulation
Scanning speed(*1)
Scanning distance(*1)
Output adjustment
Readable codes
Skew angle
Scanning resolution
Elevation angle (skew)
Tilt angle (pitch)
Light source
Reading confirmation
®
temperatures are very low, check for normal function before using the product.
ISO/IEC 1800-63 Type C (EPC global Class 1 Gen2) compatible
See next page
See next page
PR-ASK
700 tags per second MAX.
Aprrox. 8m MAX.
10 – 30dBm
QR Code (Model 1 and Model 2), MicroQR, SQRC (*2), PDF417,
MicroPDF417, MaxiCode, Data Matrix, and EAN.UCC Composite
symbol
EAN-13/8, UPC-A/E, UPC/EAN with add-on, Interleaved 2 of 5 (ITF),
Standard 2 of 5 (STF), Code 39, Codabar (NW-7), Code 93, Code 128,
GS1-128 (EAN-128), and GS1 DataBar (RSS)
360°
0.167 mm (6.6 mils) min. for two-dimensional codes
0.125 mm (4.9 mils) min. for barcodes
±50°
±50°
LED (red)
Blue LED, and beeper
®
Bluetooth
Specification Ver. 2.1+EDR compatible
SPP (Serial Port Profile), iAP2
Li-ion battery(BT-180LA, BT-SP1L)
80,000 RF tags
4 hours(BT-180LA), 8hours(BT-SP1L)
-20° to 40°C(∗4)
recommended
0° to 40°C(18° to 25°C
5% to 95% RH (∗5)
-20° to 60°C
5% to 95% PH (∗5)
30 drops from 1.2m onto concrete(5times on each of 6faces), 1.5m
IP54
1000 drops (0.5m)
90 × 174 × 128 mm
Approx. 400 g (with BT-180LA), Approx. 450 g (with BT-SP1L)
25
SP1-QUBi
)
.