Attaching The Host Terminal - Denso SP1-QUBi User Manual

2.8 Attaching the Host Terminal

2.8.1 Attachment for BHT-1800
Install the attachment for BHT-1800 series in the following procedure.
Prepare the attachment for BHT-1800 series
(separately sold).
Slide the attachment all the way to the end in the
arrow direction along the rails on both sides of
the scanner. Check that the attachment is locked.
Insert the end of BHT-1800 as shown on the
right to install.
When removing, lift the rear end of the terminal
as shown on the right.
Attachment
locking area
19