Chapter 2 Basic Operations; Loading The Batteries - Denso SP1-QUBi User Manual

Chapter 2 Basic Operations

2.1 Loading the Batteries

When you purchase the scanner, a battery is not installed. Install it in the following procedure.
1 Press down and slide the battery cover
lock ① in the direction indicated by the
arrow. Remove the battery cover. ②
2 Confirm the direction of a battery and an
electrode. Insert the battery in the arrow
① direction and completely install it ②.
3 Retract a strap for removing a battery to
the position shown in the figure.
4
Close the battery cover ① so as not to
involve the strap. Press down and slide
the battery cover lock ② in the direction
indicated by the arrow to lock the cover.
5