Product Description; Accessing The Unit - Oase BioMaster 250 Operating Instructions Manual

PRODUCT DESCRIPTION

Scope of delivery
 A
BioMaster, BioMaster Thermo
1 HeatUp 150: BioMaster Thermo 250
HeatUp 200: BioMaster Thermo 350
HeatUp 300: BioMaster Thermo 600
HeatUp 400: BioMaster Thermo 850
2 Operating instructions HeatUp
25/50/75/100/150/200/250/300/400
3 Holding ring for HeatUp assembly
4 Blind plug
5 Handle, when the handle is hinged down there are
two fasteners (10), locked
6 Unit head
7 Pre-filter with suction button
8 Connection unit with hose connectors, outlet and
inlet
9 Fastener
10 Container, filled with filter media
11 Operating instructions
BioMaster 250/350/600/850,
BioMaster Thermo 250/350/600/850
12 Rubber feet
 B
Suction unit, flow-out unit
1 Suction pipe
2 Hose
3 Flow-out pipe
4 Suction cup
5 Hose adapter, adjustable
6 Adapter, suction pipe
7 Suction basket
8 Terminal
9 Angle piece
10 Union nut
11 Short hose section as connecting piece
for flow-out pipes (3)
12 Water distributor
13 Cover cap
Intended use
Only use the product described in this manual as fol-
lows:
• BioMaster 250/350/600/850: Water filtering and
recirculation.
• BioMaster Thermo 250/350/600/850: Water heat-
ing, filtering and recirculation.
• For operation with freshwater or saltwater.
• Operate
in accordance
(→ Technical data)
Quantity
1
1
2
5
2
1
1
5
1
4
1
1
1
with instructions.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic purposes in the
home (not for commercial use).
• Only operate with water at a water temperature of
+4 °C to +35 °C.
Function description
Drawn in by a pump in the unit head, the water first
flows through the pre-filter then from the bottom to
the top through the superimposed layers of filter me-
dia. The water then flows back into the aquarium via
the flow-out pipe or water distributor.
Foam filters with different pore densities, and Hel-X
bio-elements serve as filter media.
In units with heater, the water is heated during its pas-
sage through the filter system.

ACCESSING THE UNIT

N O T E
The following applies to all units with heater:
• Adhere to the rules for careful handling. (→ Careful
handling of the heater)
Careful handling of the heater
C A U T I O N
Hot surface!
Risk of burns when touching the glass bulb.
• Switch off the heater and allow it to cool down be-
fore removing it from the water.
C A U T I O N
Risk of breaking the glass!
The glass bulb of the heater can break and cause cuts.
• Take care when handling the heater.
• Allow the heater to cool down first. Do not immerse
it in cold water or pour cold water over it.
- EN -
21