Related Manuals for Oase BioStyle 30
Summary of Contents for Oase BioStyle 30
- Page 1 BioStyle Heater 30, 50 Operating instructions Notice d'emploi Instrucciones de uso...
- Page 2 Only carry out work on the unit that is described in this manual. Always pull the power plug before working on the unit. Only use original spare parts and accessories. Should problems occur, please contact the authorized customer service or OASE. SAVE THESE INSTRUCTIONS WARNING Serious injury or death due to dangerous electrical voltage is possible with an electri- cal device in water operated with a voltage U >...
-
Page 3: Table Of Contents
Contents Product description ..........................4 Overview .............................. 4 Symbols on the unit ......................... 4 Intended use ............................5 Questions, problems, missing parts? ....................5 Installation and connection ......................6 Install heater in the BioStyle filter system ................6 Fasten heater to the aquarium wall ................... 7 Commissioning/start-up ........................8 Maintenance and cleaning ........................8 Troubleshooting ........................... -
Page 4: Product Description
Product description Overview BSE0009 Heater Suction cups, for fixing the heater to the aquarium wall Symbols on the unit The device is dustproof and waterproof to 3.3 ft (1 m). Use the device indoors only. Do not dispose of the device with normal household waste. Read the operating instructions. -
Page 5: Intended Use
Never use the unit with fluids other than water. Never run the unit without water. Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances. Questions, problems, missing parts? Before returning to your retailer, call us at 1-866-627-3435, EST, Monday-Friday, or email us at customercare@oase.com. -
Page 6: Installation And Connection
Install heater in the BioStyle filter system The heater is suitable for use in the OASE BioStyle filter. The installation of the heater is described in the OASE filter BioStyle operating in- structions. You can remove or install the heater to... -
Page 7: Fasten Heater To The Aquarium Wall
Fasten heater to the aquarium wall BSE0010... -
Page 8: Commissioning/Start-Up
Commissioning/start-up CAUTION Risk of burns from hot surface. Turn the heater off and let it cool down before removing it from the water. NOTE Fire hazard due to highly flammable material on hot surface. Turn the heater off and let it cool down before removing it from the water. Do not leave the heater unattended after removing it from the water. -
Page 9: Troubleshooting
Troubleshooting Malfunction Possible cause Remedy The water does not heat up Insufficient power Check the power supply cord The unit is defective Replace the unit Technical data BioStyle Heater Rated voltage AC V Mains frequency Max. power consumption Max. current consumption 0.92 1.83 Protection class... - Page 10 OASE North America Inc. 1-866-627-3435 customercare@oase.com www.oase-livingwater.com...