Table of Contents
Advertisement
Downloaded from www.watergardeningdirect.com
Product description
Overview
A
1
2
3
4
5
6
7
8
9
Installation and connection
Assembling the unit
B
• Screw the injector nozzle onto the pump outlet.
• Attach the hose ends to the connection sockets on the injector nozzle and on the float.
– Fasten the hose with the hose clips.
Adjusting the injector nozzle
C
• Undo the knurled screw for locking the drum.
• Turn the drum until the injector nozzle is in the desired position.
• Tighten the knurled screw.
To optimize the effect of the injector nozzle, note the specified minimum distances from
the bottom of the pond.
− When the injector nozzle is directed downwards towards to the bottom of the pond, it
− When the injector nozzle is directed at a flatter angle, it generates a stronger water flow.
14
Float
Drum with integrated pump
Power connection cable
OASE Control OUT
OASE Control IN
Injector nozzle with Venturi principle
Hose for air intake
Knurled screw, when the knurled screw is loosened the drum can be turned to adjust the injector
nozzle
Fastening material contained in the scope of delivery
generates deep aeration, thereby biologically activating the pond sludge.
Control system connection
The AquaAir Eco 250 is controlled via the OASE control network. For this
purpose you can connect the AquaAir Eco 250 either to the OASE Garden
Controller or to the OASE InScenio FM-Master Home/Cloud. For infor-
mation on OASE Control visit www.oase.com.
Advertisement
Table of Contents
