Apogee AD-1000 Operating Manual page 5

In order to comply with the new (January 1996) requirements for electronic equipment operated in the
European Union, Apogee converters must be equipped and operated with special adapters. These adapters are
inserted into all of the I/O connectors on the converters and the normal cabling is then inserted into the
adapters. Also, the equipment must be marked to reflect that it meets the CE standards ("CE mark"). The
breakdown, by product, is as follows:
AD-1000 – Special adapter kit "CE-AD-1000" must be used for the I/O connectors. The connectors are labeled
"Left Input," Right Input," "Digital Output," and "Sync Input." The converter itself must be marked "CE."
DA-1000E-20 – Special adapter kit "CE-DA-1000" must be used for the I/O connectors. The connectors are
labeled "Left Output," Right Output," "AES Input," and "S/PDIF Input." The converter itself must be marked
"CE."
PS-1000E – The power supply (PS-1000E) is internally modified and marked with "CE." The cable for the power
supply has also been internally modified and marked "CE." This cable must be used to to meet the CE require-
ments.
Conformity to EMC Directive: AD-1000
To Whom It May Concern:
This is to confirm that the Apogee Electronics Corporation product, the AD-1000 2-
channel 20-bit analog/digital converter, has been certified as being in conformity
with the provisions of the EMC Directive noted below.
The above-referenced unit was tested for compliance with EN 55013:1990 and EN
55020:1988 and was certified as compliant under Letter of Certification number
C21337-E issued by Garwood Laboratories, Inc, 7829 Industry Avenue, Pico Rivera,
CA 90660 on March 14, 1996.
I, the undersigned, as an officer of Apogee Electronics Corporation, do hereby cer-
tify that the above information is true and correct. A copy of the aforementioned
Letter of Certification is on file at the offices of Apogee Electronics Corporation.
Signed:__________________________
Position: VICE-PRESIDENT, MARKETING Date: AUGUST 7, 1996
AD-1000 Operating Manual
Notes on CE Operation
Name: RICHARD G. ELEN