Optional Accessories - Apogee AD-1000 Operating Manual

AD-1000 Operating Manual

Optional Accessories

PS-1000E
Model PS-1000E is a rack mountable dual worldwide power source for the AD-1000 with selectable 100, 120,
220, and 240 Volts AC and 50/60Hz providing dual 12.0 Volts DC regulated outputs at 1500mA each. Unit is ⁄
1
3
rack size and matches style and finish of the AD-1000. Power is distributed by two 15 Pin HD connectors on the
rear panel. This unit can power up to two Apogee converters (A/D or D/A).
PS-1000E / AD-1000 Cable
Interconnect from PS-1000 to AD-1000 for S/PDIF and Word Clock output operation (cable with a breakout of
two female BNC connectors – one for S/PDIF [red connector], the other for Word Clock output [white connec-
tor]. A male BNC to female adaptor is also provided.
AD-1000 SDIF Option
Adds SDIF and SDIFII output capability Left Data, Right Data and Word Clock via 15 Pin HD connector.
RM-1000
Model RM-1000 is a rack mountable carrier frame in Apogee purple, capable of holding up to three AD-1000,
DA-1000E or PS-1000E in a 1U EIA space.
RM-2000
The RM-2000 is an alternative fan-cooled racking frame which holds three units in a 2U space where ventilation
is a problem.
"PLATINUM OPTIONS"
AD1K-UVD (firmware option)
UV22 Digital Through option – allows a digital input signal to be UV22 processed (the standard unit only sup-
ports UV22 on signals generated by the A/D section from the analog inputs).
AD1K-PRT (firmware option)
20-bit bidirectional ADAT interface option – The standard AD-1000 provides an ADAT output. This upgrade
adds ADAT input capability, plus the ability to record and play back two 20-bit signals by using two pairs of
tracks on an ADAT machine. The 20-bit capability is compatible with Rane's PaqRat™ system.
FC-8 (Stand-alone unit)
Bidirectional ADAT to TDIF converter – This unit allows ADAT format 8-channel signals to be converted into
the TDIF format used by Tascam DA-88 machines and compatibles. It is a bidirectional, stand-alone unit with its
own power supply, and may be used independently of the AD-1000. (FC-8 available 3rd quarter 1996.)
COMBINATION OPTIONS
The AD1K-ADT option provides UV22 Digital Through and 20-bit ADAT capability as described above. The
AD1K-20FC option adds an FC-8 to provide all three "platinum options" described above. This option makes
a standard AD-1000 equivalent to the "AD-1000 Platinum Edition".
AD-1000 "Platinum Edition"
This is an AD-1000 system ordered with all three "platinum options" listed above.
Page 17