Software Version Checking; Restore Initial Setting - BITMAIN AntMiner S5 Manual

AntMiner Manual
Last updated: 3/26/2015
Page 10 of 11

7.3 Software Version Checking

You can check which version of the software you are currently running on the 'System->Overview'
page. 'File System version' displays the date of the firmware your miner use. In the example
below, the miner is using 20141218 firmware.

7.4 Restore Initial Setting

There is a 'Reset' button on the right hand side of the Ethernet port, next to the green and red
LED light, press and hold the button for 5 seconds in order to restore to the default settings and
reboot. The red LED will flash once every 15 seconds automatically if the reset is operated
successfully.
Page 10 / 11