Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BITMAIN AntMiner S5
Summary of Contents for BITMAIN AntMiner S5
- Page 1 BITMAIN AntMiner S5 Manual...
-
Page 2: Table Of Contents
AntMiner Manual Last updated: 3/26/2015 Page 2 of 11 Contents Overview ........................... 3 Features ............................. 3 Power Supply..........................4 Connect to Miner ........................4 Miner Configuration ........................7 Pool Setting ........................7 Frequency Modification ....................7 Miner Link Connection ....................7 Miner Status .......................... -
Page 3: Overview
Page 3 of 11 1 Overview The AntMiner S5 is Bitmain’s 5th generation of Bitcoin mining rig and uses the state of the art BM1384 chip powered by ultra-low power 28nm technology. S5’s are tested and configured prior to shipping to make it easier for customers to set up. -
Page 4: Power Supply
Page 4 of 11 3 Power Supply Each AntMiner S5 has four PCI-e connectors for +12V/15A DC STABLE input and all four are required. Do not connect more than one PSU to the same hashing board to prevent possible damage and instability. See below screenshot for the CORRECT and INCORRECT connection of... - Page 5 AntMiner Manual Last updated: 3/26/2015 Page 5 of 11 2. Press the IP Reporter button on IO board and you’ll hear a beep sound: 3. Check your PC, you’ll see the IP address showing in the pop-up window. Page 5 / 11...
- Page 6 AntMiner Manual Last updated: 3/26/2015 Page 6 of 11 Step 2. Enter the IP address provided into your WEB browser and proceed to login using ‘root’ for both the username and password. In the ‘Network’ section, you can assign a ‘Static’ IP address if you like. Click ‘Save&Apply’ after modifying it.
-
Page 7: Miner Configuration
Password- This is the password for your selected worker. Comment: 4.1.1 The AntMiner S5 can be set up with three mining pools, with decreasing priority from the first pool (pool 1) to the third pool (pool 3). The pools with low priority will only be used if all higher priority pools have gone offline. -
Page 8: Miner Status
UID is left blank, Miner Link will remain disabled. 4.3.4 Once ‘Miner Link’ is enabled, the ‘Server Addr’ will become fixed and cannot be updated by customers. This refers to Bitmain’s monitoring server address. 6 Miner Status You can check the operating status of your miner on ‘Miner Status’ page. -
Page 9: System Configuration And Status
AntMiner Manual Last updated: 3/26/2015 Page 9 of 11 7 System Configuration and status 7.1 System Upgrading You can upgrade he miner’s firmware on ‘System->Upgrade’ page. ‘Keep setting’ is chosen by default and should be enabled if you want to keep your current settings. -
Page 10: Software Version Checking
AntMiner Manual Last updated: 3/26/2015 Page 10 of 11 7.3 Software Version Checking You can check which version of the software you are currently running on the ‘System->Overview’ page. ‘File System version’ displays the date of the firmware your miner use. In the example below, the miner is using 20141218 firmware. - Page 11 AntMiner Manual Last updated: 3/26/2015 Page 11 of 11 Page 11 / 11...