AntMiner Manual
Last updated: 8/30/2016
Page 10 of 10
7.2 Password Modification
The AntMiner login password can be changed on the 'System->Administration' page. Once
modified, press 'Save and Apply' to save the new password.
7.3 Software Version
You can check which version of the software you are currently running on the 'System > Overview'
page. 'File System version' displays the date of the firmware your miner use. In the example below,
the miner is using 20160527 firmware.
7.4 Restore Initial Setting
There is a 'Reset' button on the right hand side of the ETH port, next to the green and red LED light.
Power on miner and let it run for 5 minutes, then press and hold the reset button for 10 seconds
in order to restore to the default settings and reboot. The red LED will flash once every 15 seconds
automatically if the reset is operated successfully.
Page 10 / 10