Optional Attachments - ABI Attachments ABI Arena Rascal Pro Setup Manual

Optional Attachments

Electric Actuator
The optional electric acuator replaces the manual
square hand jack to raise and lower the wheel system
on the Rascal. This allows the operator to raise and
the unit from the seat of the tow vehicle using a switch
secured to the handlebars or a wireless remote. An
installation video and set up guide can be found on the
support page at abisupport.com.
3-Point Conversion Kit
The 3-Point conversion kit can be installed in place of
the removable tow bar tongue, allowing the Rascal to
be compatable with both category 0 and category 1
3-point hitch types for tractors under 35 horse power. An
installation guide is available at abisupport.com.
Rail Blade
The rail blade attaches to the frame with a large pin. The
shovel cuts into the built up material along arena walls
and rails and pulls it away, saving the user time and
effort.
To use the rail blade, pin the scarifiers/profile blades
out of play. Use the top link to adjust the rail blade
angle so it is level with the footing. The rail blade is
meant to be used with only the finish rake in play. This
allows it to pull material in from the edge and then be
spread out by the rake.
Email: support@abiattachments.com 11 Call Toll Free: 877-788-7253