Gravity Cup; Setup; Cleaning - Graco 249258 Instructions - Parts Manual

Gravity Cup

Setup

1. If the fluid requires filtering, insert the fluid filter (4)
into the cup outlet and install the washer (5) into the
gun fluid fitting. See F
2. Screw the cup hand tight onto the gun. See F
3. Remove the cup lid (2) and fill the cup with fluid.
4. Tighten the lid (2) onto the cup (3).
2
3
4
5
F . 1
IG
4
. 1.
IG
IG
. 2.
F . 2
IG

Cleaning

1. Remove the cup lid (2) and pour the paint out of the
cup (3).
2. Pour a small amount of clean solvent into the cup
(3) and install the cup lid (2).
3. Shake the cup to clean the inside.
4. Spray solvent through the gun to clean the inside of
the gun fluid section.
5. Repeat steps 2 through 4 until the cup and gun are
clean.
6. Pour the solvent out of the cup (3) and wipe it dry.
2
3
Gravity Cup
311241A