Wittkopp ANCHOR User Manual

Anchor
User Manual
Brief instructions for the daily user
Note:
On the cover sheet you can find warning information, and an explanation of the symbols and
terms used, together with the exclusion of liability.
Contents
General ................................................................................................................................. 1
Opening ................................................................................................................................ 2
Opening with Dualcode ......................................................................................................... 2
Opening with active delay time .............................................................................................. 3
Triggering a silent alarm ........................................................................................................ 3
Menu functions ...................................................................................................................... 4
0 Change code .................................................................................................................. 4
General
Depending on the setup, the opening of the lock can be subject to additional restrictions. A
combination of these restrictions is also possible:
1. Delay time → Opening is only possible once a defined delay time has come to the end
(with the exception of user 9).
2. Dualcode → Opening is only possible with two valid user codes.
Normally each user code has a length of 6 digits (0-9). If a silent alarm has been configured,
the number of code digits is increased to 7 places. The 7th code digit is therefore shown greyed
out in the following description.
Ask you administrator (master code) how your system has been set up.
en_Axxxx -Teil 4-Anwenderhandbuch V2.03.docx 1 / 4