S&P RMB Series Manual page 5

ENGLISH
On receipt of
recommend that you to check the
ENGLISH
following:
On receipt of
1- That it is the correct model.
recommend that you to check the
2- That the details on the rating label
following:
are those you
1- That it is the correct model.
frequency, amps...
2- That the details on the rating label
The installation must be carried out in
are those you
accordance with
frequency, amps...
standards in force in your country.
The installation must be carried out in
accordance with
This appliance is not intended for use
standards in force in your country.
by young children or infirm persons
unless they have been adequately
This appliance is not intended for use
supervised by a responsible person to
by young children or infirm persons
ensure that they
unless they have been adequately
appliance safely.
supervised by a responsible person to
should be supervised to ensure that
ensure that they
they do not play with the appliance
appliance safely.
should be supervised to ensure that
Installation
they do not play with the appliance
IMPORTANT: Before installing and
wiring the unit, ensure that the main
Installation
supply is disconnected.
IMPORTANT: Before installing and
- Working temperature: 0-40ºC.
wiring the unit, ensure that the main
RMT Series
- Minimum working voltage: 90 Vac.
supply is disconnected.
Description
The RMT series consists of 5 three-
RMT Series
phase auto-transformer
Description
controllers, 400V-50/60Hz.
The RMT series consists of 5 three-
The manual switch C (fig.1) permits
phase auto-transformer
five speed positions and "OFF".
controllers, 400V-50/60Hz.
The manual switch C (fig.1) permits
Wiring
five speed positions and "OFF".
Put the switch C to position 0. For
Access to the connection block, open
Wiring
the front cover "T". Carry out the
Put the switch C to position 0. For
wiring as indicated in fig.3.
Access to the connection block, open
the front cover "T". Carry out the
Should the fan rotate in the wrong
wiring as indicated in fig.3.
direction, reverse the connection of
any two wires on the terminals going
Should the fan rotate in the wrong
to the motor.
direction, reverse the connection of
any two wires on the terminals going
to the motor.
the product we
the product we
require: voltage,
require: voltage,
the electrical
the electrical
can use the
Young c hildren
can use the
Young c hildren
speed
speed
Maximum permissible currents:
Type controller
RMT-1,5
Maximum permissible currents:
RMT-2,5
Type controller
RMT-5
RMT-1,5
RMT-8
RMT-2,5
RMT-12
RMT-5
RMT-8
RMT-12
RMB Series
Description
The RMB series consists of 4 single-
RMB Series
phase auto-transformer
Description
controllers, 230V-50/60Hz.
The RMB series consists of 4 single-
The manual switch C (fig.1) permits
phase auto-transformer
five speed positions and "OFF".
controllers, 230V-50/60Hz.
The manual switch C (fig.1) permits
Wiring
five speed positions and "OFF".
Put the switch C to position 0. For
Access to the connection block, open
Wiring
the front cover "T". Carry out the
Put the switch C to position 0. For
wiring as indicated in fig.4.
Access to the connection block, open
the front cover "T". Carry out the
Maximum permissible currents:
wiring as indicated in fig.4.
Type controller
RMB-1,5
Maximum permissible currents:
RMB-3,5
Type controller
RMB-5
RMB-1,5
RMB-8
RMB-3,5
RMB-10
RMB-8
RMB-10
After Sales Service
We recommend you not to try to
After Sales Service
dismantle or remove any other parts
We recommend you not to try to
than those mentioned
dismantle or remove any other parts
tampering would automatically cancel
than those mentioned
the S&P guarantee. If you detect any
tampering would automatically cancel
fault, contact your S&P dealer.
the S&P guarantee. If you detect any
fault, contact your S&P dealer.
S&P reserves the right to alter specifications without notice
S&P reserves the right to alter specifications without notice
Max. current (A)
1,5
2,5
Max. current (A)
5
1,5
8
2,5
12
5
8
12
speed
speed
Max. current (A)
1,5
3,5
Max. current (A)
5
1,5
8
3,5
10
8
10
as any
as any
5