Advertisement
Quick Links
HAVING TROUBLE W/ YOUR SOUND SYSTEM?
CONDITION
POSSIBLE CAUSE
No Sound (Power LED 'off')
• turn POWER switch 'on'
• plug in power cord into power source
No Sound (Power LED 'on')
• check for output from source
• make sure all cables are completely plugged in
• turn VOLUME knob (front panel) clock-wise to increase level
• press 'mute' button on remote control
• turn POWER switch 'off' then back 'on'
Distorted Sound
• check input cable connection
• lower input signal level
Excessive Hum or Noise
• use shielded input cables
No Sound From Wireless
• confirm transmitter POWER switch is 'on'
• turn wireless VOLUME knob (back panel) clock-wise to increase level
• plug hands free microphone into body-pack transmitter
• turn sound system POWER switch 'on'
• replace batteries in wireless mic/transmitter
• press MUTE button on remote control to turn off mute
Frequent Transmitter Dropouts
• replace batteries in wireless mic/transmitter
• move wireless mic/transmitter closer to CA-130U1
• change transmitter to different channel
NEED MORE HELP? View demonstration videos on proper system setup
& operation at our website - www.anchoraudio.com.
Anchor Audio Customer Service
888-444-6077
CA-130U1 TECHNICAL SPECIFICATIONS
Rated Power Output
30 watts
Max SPL @ Rated Power 101 dB @ 1 meter
Wireless Antenna Range
30 feet / 9.14 meter
Frequency Response
65 Hz – 18 kHz ± 3 dB
Speaker Type
4.5" woofer, 10 mm dome tweeter
AC Power Reqs.
110 – 125 VAC, 50/60 Hz
Export Model
208 – 240 VAC, 50/60 Hz (50W max)
Fuse Rating
T 1.0A / 250V
Export Model
T 0.5A / 250V (internally mounted)
Dimensions (HWD)
5.25 x 8.4 x 9" / 13 x 21 x 23 cm
Weight
8.5 lbs / 3.8 Kg
Anchor Audio, Inc.
Portable Sound Systems • Torrance, California
Inputs
Line (2)
Hi-Z, unbalanced, RCA (sum L+R)
Microphone
Lo-Z, unbalanced, 1/4" phone
Output
Line
Lo-Z, buffered, 1/4" phone
Sensitivity For Rated Output
Line
-20 dBV (100 mVrms)
Microphone
-43 dBV (7.5 mVrms)
(Specifications subject to change without notice)
ClassACT
CA-130U1 Powered Speaker Monitor
OWNER'S MANUAL
GETTING STARTED ................................................................................................................................................. 2
FEEDBACK ............................................................................................................................................................... 3
WIRELESS REMOTE CONTROL ................................................................................................................................ 3
BASIC SYSTEM OPERATION .................................................................................................................................... 4
CA-130U1 ACCESSORIES ...................................................................................................................................... 4/5
OPERATING THE BUILT-IN UHF WIRELESS RECEIVER ........................................................................................... 6
OPERATING THE WIRELESS MICROPHONE / TRANSMITTER ................................................................................. 7
HAVING TROUBLE W/ YOU SOUND SYSTEM? ........................................................................................................ 8
CA-130U1 TECHNICAL SPECIFICATIONS ................................................................................................................ 8
100-0161-000/A- 3/07
CONTENTS
Advertisement
Related Manuals for Anchor CA-130U1
Summary of Contents for Anchor CA-130U1
- Page 1 • press MUTE button on remote control to turn off mute Frequent Transmitter Dropouts • replace batteries in wireless mic/transmitter • move wireless mic/transmitter closer to CA-130U1 • change transmitter to different channel NEED MORE HELP? View demonstration videos on proper system setup &...
- Page 2 RETURNING SYSTEMS FOR SERVICE OR REPAIR For service or repair, please contact the dealer you purchased your system from or Anchor Audio Customer Service at (888) 444-6077 to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include an RA number and must be shipped prepaid.
- Page 3 DIVERSITY WIRELESS BY ANCHOR AUDIO Anchor Audio UHF wireless is a 16 channel, diversity wireless system that utilizes two independent antennae to receive signals. The diversity feature means the receiver will process the stronger of the two antenna signals, effectively minimizing dropouts and interference from other transmitting sources. The antennae are mounted internally so there are no obstructions or risk of damage.
- Page 4 BASIC SYSTEM OPERATION The CA-130U1 monitor is used to amplify the signal from a microphone, electronic musical instrument or line-level sources (cassette, CD, DVD, VCR, etc) . You’ll need a connection cable and an AC outlet. 1. Place the CA-130U1 in desired location 2.
Need help?
Do you have a question about the CA-130U1 and is the answer not in the manual?
Questions and answers