Glossary - SmartVent Positive2 User Manual

Glossary

Air Source
The space where air is taken to ventilate your home. This is either the roof cavity
or outside.
Diffuser
An attachment to help spread the flow of air. In a SmartVent Positive2 system, it
is usually the white round air outlet mounted on the ceiling.
Heat Transfer
An optional add-on feature of the SmartVent Positive2 system. The heat transfer
function takes the excess heat from your designated room and transfers it to
other areas via the SmartVent fan ducting system.
Intake Grille
An attachment to the ducting to prevent large objects being drawn into your
system. In a SmartVent system, it is usually the white, square or round air inlet on
the soffit, end of a duct in the roof space or, if you have a heat transfer upgrade
installed, in your heat source room.
Positive Pressure System
Fresh, filtered air supplied from your roof cavity or outside and distributed into
living areas in your home. This is the most common type of ventilation system
sold in New Zealand.
Touch Screen Controller (TSC)
The SmartVent's touch screen user interface typically mounted on a wall inside
your home.
Tempering Heater
An optional add-on feature of the SmartVent system. The tempering heater is
a 1kW or 2kW heater designed to be installed directly inline with room diffusers
ducting. The tempering heater is designed to lift the temperature by a few
degrees to take the edge off cold incoming air.
Summer Feature
The Summer Feature kit is an optional add-on that provides fresh air from the
outside during high temperature summer months.
32
MENU