SmartVent Positive2 User Manual page 14

Save Changes
Adjust
Vent Parameters
1 From the Home Page press SETTINGS
2. Press UP or DOWN
3. Press SELECT
4. Use UP and DOWN
5. Press SELECT
6. Press SELECT
the Home Page.
7. Press SETTINGS
8. Press HOME
1) Some settings are only available if the relevant kits are installed and advanced settings have been enabled.
to choose the mode settings you want to change
to enter into the chosen mode settings.
to change the settings.
again to move onto the next setting of the chosen mode
on final mode setting to save the changes and return to
to go back to the previous setting.
to discard changes and return to the Home Page.
MENU
to go to mode settings selection.
1).
1)
.
13