N Escutcheons; M Security Escutcheons - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3 Installation (continued)
f

N Escutcheons

Inside and outside escutcheons are surface-
applied with eight (8) #6 x 3/4" wood screws or
eight (8) #6-32 x 3/4" machine screws. (Figure 11)
Note:
Cylinder collar(s) required for functions with two
(2) cylinders or cylinders longer than #41 (1-1/8").
g

M Security Escutcheons

1. Cylinder installs under escutcheon.*
2. Through-bolt inside escutcheon to outside
escutcheon with four (4) 1/4-20x1-3/8"
screws.
Note:
Screw heads are visible on inside escutcheon.
3. Back cylinder out toward escutcheon as far as
possible.
4. Secure cylinder in lockbody. (Figure 12)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Wood or
Inside
Machine
of Door
Screws
Wood or
Machine Screws
Figure 11
* Double cylinder functions:
• Include a supplied cylinder retaining cap.
• Install both cylinders and place retaining cap
and escutcheons over each.
• Back cylinder out toward escutcheon as far as
possible. (Figure 13)
Figure 12
7
Wood or
Outside
Machine
of Door
Screws
Wood or Machine Screws
Figure 13
FM468 03/20