Ce, Re1, Re3, L And Lw Escutcheons; Re2 And Re4 Escutcheons - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3 Installation (continued)
d

CE, RE1, RE3, L and LW Escutcheons

Through-bolt inside escutcheon to outside
escutcheon with two (2) screws #8-32 x 1-7/8"
(Figure 9, item #1).
Notes:
• Screw heads should be visible on inside
escutcheon.
• Removable core or interchangeable core
cylinders require a control key (stamped with
C) to remove and install the inner cylinder
core.
• This is not provided standard ; must be
• If requesting 1-bitted control key, specify
e

RE2 and RE4 Escutcheons

Notes:
• RE4 is designed for concealed cylinders.
• Concealed cylinders are installed prior to
attaching escutcheons.
1. Outside escutcheon must be through-bolted
with items K and L (Figure 10) prior to
attaching inside escutcheon.
2. Position inside escutcheon over item L and
secure with set screw (item J) using 1/8" Allen
wrench.
Note:
Cylinder collar(s) required for functions with two
(2) cylinders or cylinders longer than #41 (1-1/8").
(Figure 10)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
requested separately.
113511 cut.
1
Inside
of Door
Figure 9
*Cylinder collar(s) required for functions with two (2) cylinders or cylinders
longer than # 41 (1-1/8"). (Figure 9)
Set Screw
Figure 10
6
Cylinder
Collar*
Outside
of Door
FM468 03/20