Wall Cleaning; Replace The Bristle Crown; Spare Parts - Kärcher FR Classic Manual

Wall cleaning

1 Adapter (order no. 4.402-022.0)
2 Hand spraygun
 Screw the adapter to the connection and
tighten it with a wrench (key width 22).
 Screw the hand spray gun on the adapt-
er, align it and tighten it with a wrench
(key width 27).
 Hold the appliance at the handle while
cleaning the wall.
Care
 Protect the appliance against frost.
 Do not allow bristles to deform during
storage.

Replace the bristle crown

 Pull the used bristle crown out of the
casing.
 Insert the new bristle crown into the
casing. Ensure correct seating (flush).

Spare parts

You will find a list of spare parts at the end
of these operating instructions.
– 3
EN 7