Park Modes; To Stop The Product; Switch Off - McCulloch ROB S600 Operator's Manual

4.3.1 Secondary area
To mow secondary areas the operating mode
Secondary area must be selected. In this mode, the
operator must move the product manually between the
main area and the secondary area. The product mows
for a selected period of time or until the battery is empty.
When the battery is empty, the product stops and the
Needs manual charging shows in the product
message
display. Put the product in the charging station to charge
the battery. When the battery is charged, the product
moves out of the charging station and stops. The
product is now prepared to start operation, but needs
confirmation from the operator first. In the
area mode, the product operates for a selected period of
time or until the battery is empty.
Note:
If you want to cut the main area after the battery
is charged, set the product to
you put the product in the charging station.
4.3.2 Power Cut
The schedule settings can be temporarily overridden by
Power Cut . It is possible to override the
selecting
schedule for 3 h. The product can not be set to cut more
than the maximum cutting time for each day.
4.3.3 Spot Cut
Spot cut is useful for quickly mowing an area where the
grass has been mown less than in other parts of the
garden. You must manually move the product to the
chosen area.
Spot cut means that the product mows in a spiral pattern
in order to cut the grass in the area where it was started.

4.4 Park modes

When the HOME button is pushed, the following parking
modes are available.
4.4.1 Home & Stay
Home & Stay means that the product goes to
Park mode
the charging station where it remains until a different
operating mode is selected.
1411 - 007 - 23.09.2020
Secondary
Main area mode before
4.4.2 Home & Wait
Home & Wait means that the product goes to
Park mode
the charging station where it remains until the next
schedule. If the product has operated the maximum
cutting time for the day, it will start to operate again the
Make an estimate of the necessary
next day. Refer to
operating time on page 22 .

4.5 To stop the product

1. Push the STOP button on top of the product.
The product stops and the blade motor stops.

4.6 Switch off

1. Press the STOP button.
2. Open the hatch.
3. Press the ON/OFF button for 3 seconds.
4. The product shuts down.
5. Check that the indicator lamp on the keypad is not
lit.
Operation - 27