Operation; The On/Off Button; To Start The Product; Operating Modes - McCulloch ROB S600 Operator's Manual

4.1 The ON/OFF button

WARNING:
instructions carefully before you start the
product.
WARNING:
away from the rotating blades. Do not put
your hands or feet close to or under the
machine when the blade motor is running.
WARNING:
when persons, especially children, or
animals are in the work area.
• Push the ON/OFF button for 3 seconds to switch
on the product. The product is active when the
indicator lamp on the keypad is lit.
• Push the ON/OFF button for 3 seconds to switch
off the product.
• The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to switch on the product.
4.1.1 The indicator lamp
WARNING:
inspection or maintenance on the product
when the product is disabled. The product is
disabled when the lamp on the keypad is not
lit.
The indicator lamp on the keypad is an important status
indicator:
• The product is active if the indicator lamp lights
continuously.

26 - Operation

4 Operation
Read the safety
Keep your hands and feet
Do not use the product
It is only safe to carry out
• The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to make the product active again.
• The product is disabled when the indicator lamp is
not lit.

4.2 To start the product

1. Open the hatch to the keypad.
2. Push the ON/OFF button for 3 seconds. The
display is lit up.
3. Use the up/down arrow buttons and the OK button
to enter the PIN code.
4. Push the START button to start to mow in the main
area.
Note:
If another operating mode is desired, push
the STAR button and confirm with the OK button.
Operating modes on page 26 .
Refer to
5. Close the hatch.
Note:
If the product is parked in the charging station,
the product will only leave the charging station when the
battery is fully charged and if the schedule allows the
product to operate.

4.3 Operating modes

When the STAR button is pressed the following
operating modes can be selected:
• Secondary area
• Power Cut
• Spot Cut
1411 - 007 - 23.09.2020