McCulloch ROB S600 Operator's Manual page 22

8. If the product must not cut grass on a specified
day, unselect the box adjacent to the 2 time
periods.
3.10.3.6 Make an estimate of the necessary operating
time
If the work area is less than maximum product capacity,
the schedule must be set to decrease the wear on the
lawn and the product. The product has a maximum
cutting time each day. You can set the operating time of
the product in the schedule. The operating time includes
cutting, searching and charging. The operating time can
be different because of many reasons, for example the
layout of the work area, the grass growth and age of the
battery. When the product has operated to the maximum
cutting time in a day, the message
complete is shown in the display of the product.
The recommended operating times for some work area
examples are shown in the table below. If the result is
not satisfactory, increase the operating time.
2
Area, m Recommended operating
time, h
250 6-7
500 13-15
750 21-22
3.10.3.7 To copy the schedule setting
1. Do steps 1–3 in To get access to the schedule
menu on page 21 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> Overview > Copy .
3. Use the arrow buttons and the OK button to copy
the schedule setting. You can copy the schedule
settings day to day or for the full week.
3.10.3.8 To reset the schedule setting
You can remove all schedule settings and use the
factory setting.
1. Do steps 1–3 in To get access to the schedule
menu on page 21 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> Overview > Reset .
a) Push the arrow buttons to select
to only set the current day to factory settings.
b) Push the arrow buttons to select
reset all schedule settings to factory settings.
22 - Installation
3.
3.10.4 Lawn shield
Lawn shield automatically adjust the cutting time to the
growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
make as much operating time as possible available for
Lawn shield . Do not restrict the schedule more than
necessary.
Today's mowing
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then
to operate or not.
Note:
operate for more than 50 hours, or if a
settings is done. Lawn shield is not changed if a Reset
of schedule settings is done.
3.10.4.1 To set the Lawn shield
1.
2.
Schedule > Advanced
3.
4.
3.10.4.2 To set the Lawn shield frequency
Set how frequently the product must cut the grass when
the Lawn shield is in use. There are 3 frequency levels:
Low, Mid and High. The higher the frequency, the longer
the product is allowed to work.
1.
2.
3.
4.
3.10.5 Security level
Schedule > Advanced
Current day
All week to
There are 3 security levels for the product.
Push the OK button.
Lawn shield , it is recommended to
When using
Lawn shield selects if the product will continue
Lawn shield is reset if the product does not
To get access to the menu on
Do steps 1–3 in
page 21 .
Use the arrow buttons and the OK button to move
Settings > Lawn shield
through the menu structure
> Use Lawn shield .
Push the OK button to select the Lawn shield.
Push the BACK button.
To get access to the menu on
Do steps 1–3 in
page 21 .
Use the arrow buttons and the OK button to move
through the menu structure Settings > Lawn shield
> Cutting time .
Use the arrow buttons to select
frequency.
Push the BACK button.
1411 - 007 - 23.09.2020
Reset of all user
Low, Mid or High