NEC Express5800 Notice page 10

0xa 0x104 Caution
0xa 0x121 Critical
0xa 0x218 Critical
0xa 0x224 Caution
0xa 0x225 Caution
0xa 0x226 Caution
0xa 0x268 Caution
0xa 0x284 Critical
0xa 0x312 Caution
0xa 0x313 Caution
0xa 0x315 Critical
0xa 0x323 Caution
0xa 0x324 Critical
0xa 0x326 Critical
0xa 0x328 Information
0xa 0x329 Information
0xa 0x410 Caution
0xa 0x411 Critical
0xa 0x414 Caution
0xa 0x433 Critical
© NEC Corporation 2016
10
ASR Timer Failure
A Critical Error occurred prior to this power-up.
DIMM Initialization Error - All DIMMs are mapped out due to
memory errors except for one to allow the system to boot.
Additional errors may be present on the remaining DIMM.
System is booting in a degraded state.
Power Fault Detected - FlexLOM %1
Power Fault Detected-Mezzanine %1.
Power Fault Detected - Embedded Storage Controller %1.
UEFI Non-Volatile Variable Store Corruption Detected. If enabled,
Secure Boot security settings may be lost.
DIMM Failure - Uncorrectable Memory Error - %1 %2 Dimm %3
%1 %2 Failure - Communication with the battery failed. Its
output may not be enabled.
%1 %2 Failure - Battery Shutdown Event Code: 0x%3.
An uncorrectable memory error was detected prior to this system
boot.
%1 Dual microSD Device Error - The microSD card in Slot %2 has
failed.
%1 Dual microSD Device Error - Both microSD cards have failed.
%1 Dual microSD Device Error - The microSD card in Slot %2 has
failed. A microSD card is not installed in Slot %3.
Power Management Controller Firmware Error - The firmware is
in Recovery Mode.
Power Management Controller FW Error - Unable to
communicate with the FW.
Innovation Engine Error - The Innovation Engine is not operating
properly. (Error Code %1).
Innovation Engine Error - The Innovation Engine is operating in
recovery mode.
Server Platform Services Firmware Error - The SPS Firmware is
not operating properly. (Error Code %1).
Scalable Persistent Memory backup device failure on Box %1
Bay %2. Persistent data may have been lost.