NEC Express5800 Notice page 13

0x14 0x7 Critical
0x29 0x1 Critical
0x32 0x120 Critical
0x32 0x212 Critical
0x32 0x215 Critical
0x32 0x216 Critical
0x32 0x217 Critical
0x32 0x220 Critical
0x32 0x221 Critical
0x32 0x232 Critical
0x32 0x233 Caution
0x32 0x234 Caution
0x32 0x270 Critical
0x32 0x305 Caution
0x32 0x318 Caution
0x32 0x389 Caution
0x32 0x412 Critical
© NEC Corporation 2016
13
additional details in a separate IML message entry if possible.
Server Critical Fault (Service Information: %1)
Improperly seated or missing device (%1, %2)
A Critical Error Event that has kept the system from booting.
-System Halted!
Processor UPI Initialization Error. A processor UPI initialization
error was detected. %1 (Major Code:%2, Minor Code:%3).
DIMM Initialization Error - Processor %1 DIMM %2. The
identified processor and memory failed to initialize properly. %3
(Major Code:%4, Minor Code:%5).
DIMM Initialization Error. A fatal error was detected while
initializing memory. %1 (Major Code:%2, Minor Code:%3).
DIMM Initialization Error - Processor %1 DIMM %2. The
identified processor and memory are operating at an incorrect
voltage. %3 (Major Code:%4, Minor Code:%5).
KTI Initialization Error - A fatal KTI initialization error has been
detected. %1 (Major Code: %2, Minor Code: %3).
Unknown Initialization Error. The system has experienced a fatal
initialization error. %1 (Major Code: %2, Minor Code: %3).
DIMM Initialization Error - A memory initialization error was
detected. %1 (Major Code:%2, Minor Code:%3).
DIMM Initialization Error - Processor %1 Channel %2. The
identified memory channel could not be properly trained and has
been mapped out. (Major Code:%3, Minor Code:%4).
DIMM Initialization Error - Processor %1 DIMM %2. The
identified DIMM could not be properly trained and has been
mapped out. (Major Code:%3, Minor Code:%4).
%1 FW Communication Issue - Unable to communicate with %2
FW. Certain management functionality is not available.
Redundant ROM Error: Both the Primary and Backup System
ROMs are invalid.
Trusted Platform Module (TPM) Self-Test Error.
Unexpected Shutdown and Restart - An undetermined error type
resulted in a reboot of the server.
Server Platform Services Firmware Error - The Server Platform