Table of Contents
Advertisement
5.7.5
Change of set point in heating operating mode
Press the "Menu" button, after the first pressing of the button
ENTER
move the cursor to the winter setpoint by pressing the
button
and then confirm with the button
ENTER
.It is now possible to change the value of the set point, within the set
limits, with the buttons
and
.
The value must be confirmed by pressing the button
ENTER
.Pressing twice on the button
ESC
returns to the main screen.
For all the other functions, refer to the control manual that is an integral part of the documentation of the unit.
5.8 Wiring diagram
The wiring diagram is an essential part of the documentation and is present inside each unit.
It is essential to refer to this document if you are unsure about anything or need further explanations regarding the auxiliary
electrical connections and power connections as well as for the electrical specifications.
In particular, refer to the wiring diagram as regards the possibility of remotely managing the functionalities that contemplate
this.
31
We reserve the right to make changes without any prior notice.
Translation from original instructions
Advertisement
Table of Contents
