Table Of Contents - Swegon BlueBox Omega Sky Installation, Use And Maintenance Manual

1 Introduction
1.1 Conformity
1.2 Description
1.2.1 Symbols
1.2.2 Labels
2 Safety
2.1 General safety precautions
2.1.1 Discharge of the safety valves
2.1.2 Emergency stop
2.2 Basic rules
2.2.1 Water flow rate at the heat exchangers
2.2.2 Water composition
2.2.3 Minimum water content in the system
2.2.4 Installing the flow switch
2.2.5 Operation with water to the evaporator at low temperature
2.2.6 Operation with water to the condenser at low temperature
2.2.7 Condensation control at the source hydraulic circuit
2.2.8 Hydraulic connection to the heat recuperator (DC option)
2.2.9 Refrigerant leak detector
2.3 Noise
2.4 Residual risks
2.5 Safety information on the refrigerant fluid
2.5.1 Hazards and health consequences
3 Receiving the product and storage
3.1 Reception
3.2 Transport
3.3 Handling
3.4 Storage
4 Ecodesign conformity
4.1 Documentation supplied with the product
4.1.1 Units conforming to all EC requirements including the Ecodesign Directive
4.1.2 Units exempt from the Ecodesign Directive and in general conforming to all EC requirements
4.1.3 Partly completed machine
4.1.4 Attached Documents envisaged with regard to the type of unit
4.1.5 Efficiency parameters required for conformity
4.2 Conformity of the application
5 Product description
5.1 Intended use
We reserve the right to make changes without any prior notice.
Contents
Translation from original instructions
6
6
6
6
7
8
8
9
9
10
11
11
12
13
15
15
16
18
19
20
20
21
21
22
22
22
23
24
25
25
25
25
26
26
26
27
28
28
3