Specifications - ETC Unison Echo Forward-Phase Dimmer-Gen 2 Installation Manual

ETC Installation Guide
Forward-Phase Dimmer–Gen 2

Specifications

For use with ETC dimming and relay products.
Ambient Environment
For indoor use only. Rated for plenum use.
Electrical Specification
Two models are available:
•
•
Note:
1 W and has an idle draw of 0.4 W.
Supported load types:
•
•
•
Compliance
•
•
Forward-Phase Dimmer–Gen 2
120 VAC, +/- 10% at 60 Hz, maximum load 600 W (5 A)
277 VAC, +/- 10% at 60 Hz, maximum load 600 W (2.17 A)
The Forward-Phase Dimmer–Gen 2 requires a minimum load of
Tungsten
Line-voltage LED loads suitable for forward-phase dimming
Loads driven by a forward-phase dimmable magnetic transformer
cULus listed
Conforms to:
UL 508 (Industrial Control Equipment)
-
UL 916 (Energy Management Equipment)
-
UL 2043 (Plenum rated)
-
CSA C22.2 No. 14 (Industrial Control Equipment)
-
CSA C22.2 No. 205 (Signal Equipment)
-
Page 3 of 12 ETC