Advertisement
ETC Setup Guide
Ion Xe RPU
7:
If Hard Key - Click on the {HardKey} drop down menu and select the hard key you wish to use. Then
click {Accept}.
8:
Repeat this process for any other buttons you wish to reconfigure.
9:
To restore the default buttons at any time, click the {Restore Defaults} button.
To import a button configuration:
You may import an RPU button configuration file from a USB device.
1:
Click the {Import} button in the RPU area of the Buttons section of the ECU. The ECU will search for
valid RPU button file.
2:
If a valid file is found, the ECU will ask you if you want to import the settings. Click {Yes}. The settings
will be imported.
3:
Click {Ok}.
To export a button configuration:
You may export your RPU button configuration to a USB device.
1:
Click the {Export} button in the RPU area of the Buttons section of the ECU.
2:
If a USB drive is available, the ECU will ask you to choose the desired drive from the drop down menu.
Click on the desired USB drive.
3:
Click {Accept}. The button configuration will be saved to the USB drive.
4:
Click {Ok}.
For more information on settings in the ECU, please see Appendix A: Eos Configuration Utility (ECU) in the
Eos Ti, Eos, and Gio Operations Manual.
Ion Xe RPU
Page 3 of 3
ETC, Inc.
Advertisement
