Dyna-Glo LPC25 Series User's Installation, Operation And Maintenance Manual page 3

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
LPC25 Series
LPC80 Series
LPC200 Series
The heater is designed for use as a construction heater in
accordance with ANSI Z83.7b, CSA 2.14b. Other
standards govern the use of fuel gases and heating
products for specific uses. Your local authority can advised
you about these. The primary purpose of construction
heaters is to provide temporary heating of building under
construction, alteration or repair. Properly used, the heater
provides safe economical heating. Products of combustion
are vented into the area being heated.
For Technical Support or Troubleshooting, Call: 1-877-447-4768
The heater must be located at least 6 ft. (1.83 m) in the
U.S.; or (ii) 10 ft. (3 m) in Canada, from any propane gas
container.
CLEARANCE TO COMBUSTIBLES:
www.ghpgroupinc.com 3