Dyna-Glo WORKHORSE FA43 Series User's Manual And Operating Instructions

Dyna-Glo WORKHORSE FA43 Series User's Manual And Operating Instructions

Propane construction heater

Advertisement

Quick Links

USER'S MANUAL AND OPERATING INSTRUCTIONS
C
ANS Z83.7-2017 CSA 2.14-2017
CONSTRUCTION HEATER
Adequate ventilation must be provided.
GHP Group, Inc.
6440 W Howard St
Niles, IL 60714-3302
GENERAL HAZARD WARNING
FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH
THIS HEATER, CAN RESULT IN DEATH, SERIOUS BODILY INJURY AND PROPERTY LOSS,
OR DAMAGE FROM HAZARDS OF FIRE, EXPLOSION, BURN. ASPHYXIATION, CARBON
MONOXIDE POISONING, AND/OR ELECTRICAL SHOCK.
ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD
USE OR SERVICE THIS HEATER.
IF YOU NEED ASSISTANCE OR HEATER INFORMATION SUCH AS AN INSTRUCTION
MANUAL, LABEL, ETC; CONTACT THE MANUFACTURER.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 877-447-4768 8:30 a.m. – 4:30 pm CST, Monday – Friday
PROPANE
CONSTRUCTION HEATER
Dyna-Glo® WORKHORSE MODEL:
(37,000/43,000 BTU/HR, FORCED - AIR)
US
CONSUMER: Retain this manual for future reference.
or email us at customerservice@ghpgroupinc.com
www.ghpgroupinc.com
LPFA43WH
Printed in China
LPFA43WH
IMLPF43WH - LDC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WORKHORSE FA43 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dyna-Glo WORKHORSE FA43 Series

  • Page 1 PROPANE CONSTRUCTION HEATER USER’S MANUAL AND OPERATING INSTRUCTIONS Dyna-Glo® WORKHORSE MODEL: LPFA43WH (37,000/43,000 BTU/HR, FORCED - AIR) ANS Z83.7-2017 CSA 2.14-2017 CONSTRUCTION HEATER Adequate ventilation must be provided. GHP Group, Inc. 6440 W Howard St LPFA43WH Niles, IL 60714-3302 GENERAL HAZARD WARNING...
  • Page 2: Table Of Contents

    PROPANE CONSTRUCTION HEATER TABLE OF CONTENTS Introduction & Specifications ..........2 - 3 •...
  • Page 3: Introduction & Specifications

    PROPANE CONSTRUCTION HEATER DYNA-GLO PROPANE FORCED AIR CONSTRUCTION HEATERS The heater is designed and approved for use as a construction heater under ANSI Z83.7 CSA 2.14. It is hard CHECK WITH YOUR LOCAL FIRE SAFETY to anticipate every use which may be made of this heater.
  • Page 4 PROPANE CONSTRUCTION HEATER USA 8-Hr Time weighted average Canada 8-hr time weighted average (OSHA 29 CFR 1926.55 App A) WorkSafe BC OHS Guidelines Part 5.1 and Ontario Workplaces Reg 833 50 ppm 25 ppm 5000 ppm 5000 ppm 3 ppm (Reg 833) Canada STEL (15 minutes Reg 833/1 hour USA –...
  • Page 5: General Safety Instructions

    PROPANE CONSTRUCTION HEATER GENERAL SAFETY INSTRUCTION Accidents are always tragic especially because so many of them could have been prevented with little care and judgment. There are some basic good practices, we hope you will follow for safe use of your heater. IMPORTANT SAFETY INSTRUCTION •...
  • Page 6: Unpacking Heater

    PROPANE CONSTRUCTION HEATER UNPACKING HEATER 1. Remove heater from carton. 2. Remove all protective packing applied to heater for shipment. 3. Retain cartons and packaging material until unit is operated and found in good condition. 4. Check heater for any shipping damage. If heater shows any external or internal damage, promptly inform dealer/distributor where you purchased heater.
  • Page 7: Size & Capacity Of Propane Cylinders

    PROPANE CONSTRUCTION HEATER INFORMATION ON SIZE * CAPACITY OF PROPANE GAS CYLINDERS: The chart below shows the number and size of propane tanks needed to run this heater. *Less gas is vaporized at lower temperatures. You may need two or more 100 pound (45 kg) tanks or one larger tank in colder weather. (See the parts list for your model of heater to get the specified regulator assembly.) Number of Tanks Temperature...
  • Page 8: Installation To The Propane Gas Tank

    PROPANE CONSTRUCTION HEATER INSTALLATION TO THE PROPANE GAS TANK IMPORTANT: You must use a propane/LP gas supply cylinder that is compatible with the connection device provided with the hose and regulator. Regulator Propane/LP Supply Valve Propane/LP Fuel Gas Tank Fitting Hose to Heater Hose to Regulator...
  • Page 9: Leak Checking & Positioning Heater

    PROPANE CONSTRUCTION HEATER PROPANE SAFETY Propane is safe to use when properly handled. Careless handling of the Propane gas tank could result in fire and/or an explosion. Therefore: • Always keep tank/cylinder securely fastened in an upright position. • Avoid tipping tank on its side when connected to a regulator since this may cause damage to diaphragm in regulator.
  • Page 10: Test Firing Heater & Storage

    PROPANE CONSTRUCTION HEATER SHUTDOWN INSTRUCTIONS WARNING : Motor and fan must be running before lighting, during operation and at shutdown, in order to prevent a flame-out condition which could result in personal injury or property damage. Turn gas valve knob clockwise to OFF position.
  • Page 11: Troubleshooting

    PROBLEM POSSIBLE   C AUSE CORRECTIVE   A CTION 1. Control   d ial   i s   o ff   a nd   u nit   i s 1. This   h eater   u ses   a   c on4nuous   s park 1.
  • Page 12: Wiring Diagrams

    PROPANE CONSTRUCTION HEATER WIRING DIAGRAM WIRING DIAGRAM EARTH (SHELL) ENVELOPPE (EXTERIEURE) POWER CORD TIERRA (CUBIERTA) CORDON D'ALIMENTATION CABLE DE RELAY /RELAIS /RELEVADOR GREEN /VERT / VERDE ENERGIA BLACK / NOIR / NEGRO WHITE / BLANC / BLANCO COPPER/ COBRE/ CUIVRE YELLOW / JAUNE / AMARILLO IGNITOR BLACK/ NOIR / NEGRO...
  • Page 13: Fa43 Series

    PROPANE CONSTRUCTION HEATER REPLACEMENT PARTS LIST MODEL: FA43 Series NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
  • Page 14: Replacement Parts List

    PROPANE CONSTRUCTION HEATER REPLACEMENT PARTS LIST PART NUMBER Article No. DESCRIPTION 43 SERIES INNER SHELL ASSEMBLY FA43-CR-02 NOZZLE FA43-CR-08 FLAME CAP FA43-CR-09 THERMAL SWITCH BRACKET 2304826 THERMAL SWITCH 2201373 SPARK ELECTRODE 2201375 HANDLE ASSEMBLY (BLACK) 2101447 HANDLE ASSEMBLY (GRAY) 2305426 OUTER SHELL FA43(ZS)-01-D MOTOR ASSEMBLY...
  • Page 15: Warranty

    WARRANTY LIMITED WARRANTY: This limited warranty is extended to the original retail purchaser of this Forced Air/Convection/Radiant Heater and warrants against any defect in materials and workmanship for a period of one (1) year from the date of retail sale (lifetime warranty for the brass nozzle burner only). GHP Group, Inc., at it’s option, will either provide replacement parts or replace or repair the unit, when properly returned to the retailer where purchased or one of our service centers as directed by GHP Group, Inc., within one (1) year of retail purchase.
  • Page 16 WARRANTY REGISTRATION IMPORTANT: We urge you to fill out your warranty registration card within fourteen (14) days of date of purchase. You can also register your warranty on the internet at www.ghpgroupinc.com. Complete the entire serial number. Retain this portion of the card for your records.

This manual is also suitable for:

Workhorse lpfa43wh

Table of Contents