Record A Preset; Deactivate - ETC Unison Echo Astronomical TimeClock Configuration Manual

Record a Preset

Before recording a new preset or recording over an existing preset, set the
desired lighting look using Echo Inspire or Preset stations, the product user
interface, or an external DMX control source.
Note:
Step 1:
Step 2:
Step 3:
Step 4:

Deactivate

Step 1:
Step 2:
24
Recording a preset will affect the function of the button stations
and other products in the system.
Select Presets from the Main Menu.
Press [Down] to advance to Preset #, then press [Enter] to
modify the current selected preset number.
Use the [Up] or [Down] button to scroll the list of available
preset numbers from 1-64, then press [Enter] to select the
new selection. (Maximum number of preset is dependant
on the product type.)
Press the [Down] button twice to advance to Record, then
press [Enter] to initiate the record action. This will record the
new preset values to the selected preset across all
connected Echo hosts.
Select Presets from the Main Menu. The Presets menu
displays the status of the active preset in the selected space.
Press [Down] to advance the selection to Deactivate, then
press [Enter]. The preset will deactivate and the status will
display "No Active Preset".
Echo TimeClock Configuration Manual