Auto Timed Hold; Schedule An Event - ETC Unison Echo Astronomical TimeClock Configuration Manual

Table of Contents

Advertisement

Auto Timed Hold

All scheduled events support a configurable Auto Timed Hold property with
options of No, Yes, and While Closed. By default, all events are set to use
While Closed for the Auto Timed Hold setting.
When a preset or sequence is manually triggered during an event and Auto
Timed Hold is set to Yes, that active event is placed on hold until the
interrupting action has completed and the hold timer lapses (hold timer is
default is 120 minutes), or in the case of the While Closed setting, the Open
event occurs.
When the hold timer expires, the currently scheduled event executes.
When a manual lighting control event occurs during an event, and Auto
Timed Hold set to No, the events schedule is not placed on hold. Instead the
next scheduled event will override the manual control at its pre-configured
event time.

Schedule an Event

Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
2
Schedule an Event
From the Main Menu, select Schedule Events. The Schedule
Events menu appears with event number selected.
Press [Enter] to modify the event number.
Use the [Up] and [Down] buttons to increment/decrement
the list of available event numbers. Press [Enter] to accept
the current displayed selection.
Scroll to select Action and
press [Enter]. Each press of
[Enter] cycles through the
available list of action
options including Preset,
Sequence, Off, and None.
a:
Scroll to select either
Preset or Sequence and
press [Enter]. The focus changes to Action.
• When Preset or Sequence is the selected action,
additional menu options display for specification.
b:
Press [Down] to advance to Space.
c:
Press [Enter] to choose the Space number.
d:
Use the [Up] and [Down] buttons to scroll to the desired
Space number from the available Spaces in the system. A
maximum of 16 spaces can be programmed per system.
e:
Press [Enter] to commit the selection.
Scroll through the Schedule Events menu and select either
Preset or Sequence, depending on what was chosen in Step
4a.
Press [Enter] to modify the number.
Schedule Events
Event Number:
Action:
Space
Preset
Recurrence:
When:
Time:
Auto Timed Hold:
While Closed
50
Preset
1
1
Everyday
Time of Day
--:-- am
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-atc

Table of Contents