Set Warn Time; Set Time Zone; Set Latitude And Longitude - ETC Unison Echo Astronomical TimeClock Configuration Manual

Set Warn Time

Warn Time is the amount of time before the TimeClock issues a scheduled
Off action, preceding a Flick Warn. Factory default Warn Time is two
minutes, but can be set to any value from 1-60 minutes.
Step 1:
Step 2:
Step 3:

Set Time Zone

For accurate real-time and astronomical events, the E-ATC must be set to
reflect your current time zone. Select the time zone based on hours offset
from GMT (Greenwich Mean Time). Visit
wwp.greenwichmeantime.com/
Step 1:
Step 2:
Step 3:

Set Latitude and Longitude

Set your accurate location for proper calculation of sunrise and sunset
times.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
2
Timeclock Settings
Select Warn Time from the Timeclock Settings menu.
Press [Enter] to modify the current selection.
Use the [Up] or [Down] buttons to scroll to the desired Warn
Time and press [Enter].
for a complete listing of GMT time zones.
Select Time Zone from the Timeclock Settings menu.
Press [Enter] to modify the current selection.
Use the [Up] or [Down] buttons to scroll and select the
current GMT time zone offset and press [Enter].
Select Latitude from the Timeclock Settings menu.
Press [Enter] to modify the current selection.
Use the [Up] or [Down] buttons to scroll and select the
accurate angle and press [Enter].
Use the [Up] or [Down] buttons to scroll and select the
accurate minutes location and press [Enter].
Use the [Up] or [Down] buttons to scroll and select either N
(North) or S (South), then press [Enter].
Select Longitude from the Timeclock Settings menu and
repeat
steps 2 through 5 above.
http://
21