HP 75000 C Series Service Manual page 10

How to Use this Manual
Manual Overview
This manual shows how to service the
HP E1426A 500 MHz
Digitizing
Oscilloscope. Oscilloscope operation, installation, and configuration
information is not discussed in this manual. Refer to the "HP 75000
Series C HP E1426A User's Manual" for installation, configuration,
and operating information.
Manual Content
This manual has eight chapters and one appendix.
C h a p t e r 1 General Information: provides a basic description,
and lists available options and accessories. Also lists the tools
and test equipment required for service.
C h a p t e r 2 Installation: contains information and procedures
required to install the oscilloscope into the mainframe, perform
initial inspection, prepare for use, and storing and shipping
instructions.
C h a p t e r 3 Operating Instructions: contains information and
procedures required to operate the oscilloscope, perform scheduled
preventive maintenance, and perform the operator's check.
C h a p t e r 4 Verification Tests: contains information and
procedures required
to
test the oscilloscope. Three levels are
provided for functional verification, operation verification, and
performance verification.
C h a p t e r 5 Adjustments: contains information and procedures
required to readjust the oscilloscope to within its rated
specifications.
C h a p t e r 6 Replaceable
Parts:
lists the part numbers for all
user replaceable parts in the oscilloscope. Also provides
information on ordering spare parts and module/assembly
exchange.
C h a p t e r 7 Manual Changes: contains information required to
adapt this manual to instruments whose serial numbers are lower
than those listed on the title page.
C h a p t e r 8 Service: contains information and procedures to aid
in fault isolation and repair of the oscilloscope.
Appendix A References: contains a list of all reference
documentation required when servicing the oscilloscope.