website www.itechmedicaldivision.com in the section dedicated to
magnetotherapy.
It is recommended to:
•
Check the position and the meaning of all the labels on the
equipment;
•
Do not damage the applicator by acting on the connecting wire, and
do not wrap the wire around the applicator or the appliance;
Avoid the use of the system to persons not adequately educated by
•
reading the manual. Keep out of the reach of children, animals and
pests;
•
During therapy it is advisable to the patient and user not to wear
metallic objects;
Check the integrity of the power supply before each use. Avoid use in
•
case of signs of damage to the casing or to the connecting wire;
•
ONLY use cables and applicators supplied by the manufacturer.
Inadequate cables and applicators may damage the appliance and/or
damage the patient;
Do not hold the device in hand while using it. It Is recommended to
•
place it on a table or similar support: position the device in such a
way that this operation is always easy and can be safely executed.
Place the device on a stable shelf (table, nightstand), away from
other devices that may interfere or prevent safe use of the device
and related accessories.
Is prohibited:
The use of the device by persons incapable of understanding and
•
wanting, suffering from sensitiveness to sensitivity, temporarily
incapacitated if not assisted by qualified personnel;
The use of the device near inflammable substances, gases, explosives,
•
in environments with high concentrations of oxygen, in the presence
of aerosols or in very humid environments (do not use in the
bathroom or during the shower/bath);
The use of the appliance in the presence of signs of deterioration
•
and/or damage to the same or to the accessories (electrodes,
chargers, etc.) and/or cables; contact the dealer or the manufacturer
in accordance with the Assistance section. Check the integrity before
each use;
The use of the appliance contemporary to liniments containing free
•
ions of magnetic metals;
IACER Srl
12
MNPG53-07
Need help?
Do you have a question about the I-TECH MAG2000 PLUS and is the answer not in the manual?