CORNING Stripettor 4998 Instruction Manual

Ultra pipet controller charging stand

Download this manual

Corning

Stripettor

Ultra Pipet Controller

Charging Stand

2. Charging Stand Options

Instruction Manual

Cat. No. 4998

1. Introduction

The Corning Stripettor Ultra Pipet Controller Charging Stand is a device intended to conveniently

charge and store a pipet controller when not in use. Depending on the use needs, there are three

positions to store the pipet controller, and are visible as icons printed on the stand.

™

Break position

Convenient while working,

helps to avoid contamination

Rest position

Ideal way to store a pipet

controller after use

Note:

Do not plug the

charger to the pipet

controller while

charging on the

stand

Charging position

Note:

Used while pipet controller

Do not plug the

is in charging process

charger to the pipet

controller while

charging on the

Need help?

Do you have a question about the Stripettor 4998 and is the answer not in the manual?

Page 1 1. Introduction The Corning Stripettor Ultra Pipet Controller Charging Stand is a device intended to conveniently charge and store a pipet controller when not in use. Depending on the use needs, there are three positions to store the pipet controller, and are visible as icons printed on the stand.
Page 2 4. Charger Universal charger with set of adapters (Cat. No. 4996), 3-position charging stand IMPORTANT: is supplied with the Corning® 2. Charging Stand Options 2. Charging Stand Options Instruction manual The pipet controller may be charged only Stripettor™ Ultra Pipet Controller with the original charger.
Page 3 controller while controller while charging on the charging on the stand stand 5. Charging the batteries on charging stand 6. Additional information Put the pipet controller on the stand. Charging temperature: 10°C to 35°C. Plug the charger into the stand outlet. Before the pipet controller is activated for the first time, the batteries Connect the charger to the adapter should be charged.
Page 4 According to Directive 2012/19/EU of the European Parliament and Council of 4th July 2012 on waste electrical and electronic equipment (WEEE) as amended, the Corning® Stripettor™ Ultra Pipet Controller Charging Stand is marked with the crossed-out wheeled bin and must not be disposed of with domestic waste.