Shenzhen Xunlong Software Orange Pi Plus User Manual page 8

Orange Pi Plus User Manual
minutes. There are three steps to boot your Orange Pi Plus.
Step 1: Get what you need
To enjoy the use of your Orange Pi Plus, you will need at least the accessories in the
table below.
No. Item
1 TF card
HDMI(Full
2a
sized) to HDMI
/ DVI lead
2b AV video lead
3 Keyboard and
mouse
4 Ethernet
cable/USB
WiFi(Optional)
5 DC power
adapter
6 Audio lead
(Optional)
7 Mobile Hard
disk (Optional)

www.orangepi.org
Minimum recommended specification & notes
•
Minimum size 4Gb; class 4 (the class indicates how fast the card is).
•
We recommend using branded TF cards as they are more reliable.
•
HDMI to HDMI lead (for HD TVs and monitors with HDMI input).
OR
HDMI to DVI lead (for monitors with DVI input).
•
A standard AV video lead to connect to your analogue display if
you are not using the HDMI output.
•
Any standard USB keyboard and mouse should work.
•
Keyboards or mice that take a lot of power from the USB ports, however,
may need a powered USB hub. This may include some wireless devices.
•
Networking is optional, although it makes updating and getting new
software for your Orange Pi Plus much easier.
•
A good quality, DC power supply that can provide at least
2.0A at 5V is essential. While the USB OTG input cann't be used.
•
You can choose a 3.5mm jack audio led to connect to
audio port to get stereo audio.
•
You can choose to connect a mobile hard disk to SATA port to store more files.
Shenzhen Xunlong Software CO., Limited
www.xunlong.tv