Other Technical Specifications - S&P CONTROL ECOWATT Manual

OTHER TECHNICAL SPECIFICATIONS:

Terminal connection capacity: 1 to 2,5 mm2
Electrical insulation class: Class 1
Box:
- Protection index: IP 55
- Material: ABS V0
- Colour: RAL 7035
- Supplied with two cable glands: 2 x PG21
- (Width x Height x Depth in mm) : 165 x 220 x 100
Storage: -20ºC to +60ºC; Relative humidity: 30 to 90%RH
Location:
- Temperature: -10ºC to +50ºC
- : 30 to 95% without condensation
Maintenance: Maintenance free, regularly check the connections and the atmospheric
temperature to ensure that it is within the product limits.
Conformity: All CONTROL ECOWATT models comply with European Directives and standards
and carry the EC conformity marking.
Connection to the electrical supply must be undertaken in accordance with current norms and
standards on health and safety.
IMPORTANT! Installation, start-up, adjustment and all handling must be carried out by
qualified professionals and in accordance with current standards on installation and
health and safety. Before switching to low voltage, check that the input voltage
corresponds to the data, as indicated on the product: connection to a different voltage
could damage or destroy the machine. Disconnect the power supply before handling. Do
not touch the low voltage parts. Danger of serious injury or death. Electrical connection
that is not in accordance with these instructions and/or current installation standards
invalidates the guarantee.
21