Advertisement
Available languages
Available languages
- Wire the fan to the mains electrical supply
in accordance with the enclosed electrical
instructions.
- Before switching on the electrical supply,
locate the interior grille (1) to the fan
casing (3) and fix into position by
tightening the fixing screw (5).
Mounting the fan in a wall
- Firstly cut a circular hole in wall in which
the fan is to be installed. Cut the hole size
in accordance with the HCM model size
as indicated in Figure (A2).
- Figure (B). Remove the interior grille (1)
from the fan casing by loosening the
fixing screw (5).
- Remove the exterior grille (with shutters)
by removing the interior plastic fixing nuts
(6).
- Separate the fan casing (3) from the
exterior grille (2).
- Position the fan casing against the wall
(over cut hole) and mark four screw fixing
positions through the holes provided.
- Fix the fan casing to the wall with the
screws provided.
- Wire the fan to the mains electrical supply
in accordance with the enclosed electrical
instructions.
- Before switching on the electrical supply,
locate the interior grille (1) to the fan
casing (3) and fix into position by
tightening the fixing screw (5).
- If required the external grille can be
installed as follows:
- Remove the threaded fixing rods from the
external grille.
- Position the external grille against the
wall (cut hole) and mark two screw fixing
positions through the threaded rod holes
provided.
- Fix the exterior grille to the wall with the
screws provided.
Electrical Connection
- Before carrying out any installation or
wiring of the HCM range, ensure that the
mains electrical supply is disconnected.
- Before making any electrical connections
ensure that the Voltage and Frequency of
the mains electrical supply matches that
of the fan data plate label (maximum
permissible deviation of voltage and
frequency +/- 5%).
Maintenance
- Before conducting any maintenance or
cleaning of the fan ensure that the unit is
disconnected from the mains electrical
supply.
- We would recommend that the appliance
is cleaned regularly to ensure trouble free
operation.
- To clean the appliance simply wipe with a
damp (not wet) cloth. Do Not Use any
abrasives or solvents.
- Do Not Use high pressure water or steam
cleaning apparatus to clean the unit.
TECHNICAL ASSISTANCE SERVICE
All HCM panel mounting axial fans are
offered with a comprehensive guarantee
and Technical Assistance Service support.
If the appliance is found to be defective
within the period of the guarantee then local
Technical Assistance Service should first be
contacted. Only
product should be returned to an authorised
S&P supplier.
IMPORTANT: Any repairs or work carried
out on the appliance by person(s) not
authorised by S&P will invalidate the
guarantee.
S&P reserves the right to alter specifications
without prior notice.
The CE norm and our commitment to future
generations require us to recycle waste
material;
please
elements of the packaging into containers
for recycling, and carry the equipment that
has been replaced to the nearest waste
center or your dealer.
then if necessary, the
deposit
all
remaining
Advertisement
