Setup Page - Tuning Tab; Setup Page - Locale Tab - AMX MAX-AVP Operation/Reference Manual

Setup Page – Tuning tab
Use the options in the Tuning tab (FIG. 35) to set the volume level for stereo analog outputs (Volume),
and fine-tune video output (Brightness, Contrast Saturation).
FIG. 35

Setup Page - Tuning tab

Select one of the four tabs, and use the Up/Down arrow buttons to adjust the selected setting.
Setup Page – Locale tab
Use the options in the Locale tab (FIG. 36) to select preferred content audio and subtitle languages, and
to set the region code for the AVP's DVD drive.
FIG. 36

Setup Page - Locale tab

To change these settings, select the Up or Down arrow for setting that you want to change, and press
SELECT to scroll through the possible choices.
Use the options in the Region Control section of this page to change the DVD Region Code setting for
the DVD drive in the MAX-AVP (FIG. 37):
MAX-AVP Audio-Video Player
Select the double arrow to make quick adjustments by pressing SELECT.
Select the single arrow to make fine adjustments by pressing SELECT.
English (EN) is the default setting.
Refer to the DVD Language Codes section on page 51 for a full listing of supported languages
and their associated language codes.
Highlight and select Save as Default to save the current language preferences as the default
settings.
MAX-AVP User Interface
49