AMX MAX-AVP Operation/Reference Manual page 18

Installation
FIG. 4
Remove the four screws that secure the top of the enclosure to the bottom
4. Carefully remove the top of the chassis. The rack-ears will mount to the sides of the top section of
the chassis.
5. Insert the four mounting posts on the rack-ear into a matching set of holes on the chassis, with the
rack-mounting holes on the rack ears facing forward and away from the chassis (FIG. 5).
MAX-AVP chassis
(top section - top view)
FIG. 5 Insert the four mounting posts on the rack-ear into a matching set of holes on the chassis
There are several rows of holes on the top section of the chassis that can be used for
installing the rack-ears. In this example, we'll use the second row of holes from the
front to facilitate securing the washers and nuts
6. On each of the four mounting posts, install washers and secure with a nut (FIG. 6):
split lock-washer
FIG. 6 Install the flat washer, split lock-washer and nut to each of the four mounting posts
12
Remove the four screws that secure the top of the chassis to the bottom
front
nut
flat washer
Side panel of chassis
Insert the 4 mounting posts on the
rack-ears into a matching set of holes
on the chassis
Rack-ear
Side panel of chassis
Rack-ear
MAX-AVP Audio-Video Player