Configuring The Max-Avp - AMX MAX-AVP Operation/Reference Manual

MAX-AVP Audio/Video Player
3. Locate your local copy of the ISO file and choose to record a new disc from a disc image (ISO
image) to a new blank media (CD-R/CD-RW recommended).
Do not burn a "data disc". Do not drag and drop the ISO file. The final disc image
should contain a directory of multiple files rather and a single ISO file on the disc.
4. Once the new media has been created, insert it into the MAX-AVP and cycle power to the unit.
Upon restart, the AVP detects the files on the firmware update CD and begins the update process.
5. Do not interrupt this update process. Once the update is complete, the MAX-AVP will eject the disc.
6. Immediately after the disc is ejected, cycle power on the unit again.
When the unit again restarts, it has completed the update process and is now ready to use.

Configuring the MAX-AVP

Refer to the Setup Page section on page 46 for details on configuring the MAX-AVP.
6
MAX-AVP Audio-Video Player