How To Use Flash Power Control - Sekonic RT-GX Operating Manual

2)

How to use Flash Power Control

1.
Set the Flash Duration Analysis t value. ( P43)
2.
Make sure that the CH (channel), Group and Wireless ID are the
same between the light meter and the receivers in use. ( P4,
P8, P11)
3.
Touch the [Flash Power Control] Icon (
Screen.
The Flash Power Control Screen is displayed.
4.
Select a [Group] Button (default setting: A to E) on the Flash
Power Control Screen.
Only flash unit with the receiver set to the selected Group will fire.
[Measuring Screen]
[Flash Power Control] Icon
NOTE
To select the group which is not displayed, go to Select Group Screen and select (A to F, 0
to 9). ( P8)
[Flash Power Control
Screen]
[Group] Button
39
2. About Godox Radio System
) on the Measuring
[Flash Power Control
Screen]
Group Display
●